I-o-display-systems Basic I/O Product Manuel d'utilisateur télécharger pdf (Page 30)

Setup & Installation 2

2-13(Vol.1)

BASIC I/O setup:

BASIC I/O setup is accomplished with a sequential display and pushbutton. Below is a

diagram of the location of these components.:

Figure 2-9 BASIC I/O Connectors, Switches and Indicators.

Unit type (digital or analog), Unit address, baud rate, and 2 or 4 pass protocols are all

pushbutton configurable and appear on the sequential display. After line power application

and the performance of system diagnostics, there is a five second period during which these

setup values any be changed. Changed values are automatically saved on a non-volatile

EEPROM.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 80 81

Pas de commentaire

I-o-display-systems Basic I/O Product Manuel d'utilisateur Page 30